Skip to content
  1. Insights
  2. Legal updates
  3. Saudi Arabia’s New Product Safety and Quality Standards Laws

Saudi Arabia’s New Product Safety and Quality Standards Laws

The scope of the new Product Safety Law and Standards and Quality Law, the obligations on manufacturers and distributors, liability, regulatory oversight and important dates.

15 October 2024·4 min read
On this page

    Saudi Arabia has enacted a new Product Safety Law and Standards and Quality Law (issued by Royal Decree No. (M/36) dated 04/08/2024G), overseen by the Saudi Standard, Metrology and Quality Organization (SASO). These laws were issued on August 16, 2024, and are intended to come into effect on November 16, 2024.

    Whilst there are many existing sector-specific standards and regulations, these overarching laws are a significant step towards robust and consolidated consumer protection standards in Saudi Arabia.

    Businesses operating in the entire supply chain (from producing raw materials, manufacturing, importing to distribution) will need to be aware of these new developments.

    Scope of Application

    The Product Safety Law applies to all Products sold in the Saudi market, including:

    • a) local products;
    • b) imported products; and
    • c) electronically traded products.

    Products that fall under the jurisdiction of the Saudi Food and Drug Authority are not captured by the Product Safety Law.

    The Standards and Quality Law mandates general guidelines for preparing, adopting, and approving specifications for all products and services offered in Saudi Arabia.

    Comprehensive Consumer Protection

    The new laws aim to protect consumers from unsafe or substandard products whilst ensuring high standards of quality are met.

    Under the Product Safety Law, the primary objective is to prevent risks associated with products placed on the market, ensuring they meet acceptable safety standards.

    The following factors must be considered when assessing product safety:

    • I. Characteristics and composition of the product
    • II. Impact when used with other products
    • III. Presentation: instructions, warnings, disposal
    • IV. consumer risks
    • V. Consumer use and safety expectations

    The obligation of ensuring product safety is on the entire supply chain.

    Manufacturing and Supply Chain Obligations

    The Product Safety Law requires that manufacturers, authorised representatives, importers and distributors (Economic Operators) must:

    • Ensure the product is safe
    • Ensure the product fully complies with technical regulations and requirements
    • Assess potential product risks to take correct action
    • Prove product safety if requested
    • Provide product risk information to consumers
    • Place, trademark and contact information on products
    • Stay informed of risks, have measures in place to issue warnings and recalls

    The Implementing Regulations (expected to be issued around 16 November 2024) will further specify the responsibilities and duties of the manufacturer, authorised representative, and importer in this regard.

    Distributors must also ensure that:

    • their products comply with the requirements of the Product Safety Law
    • they do not offer products in the market that they know or should know, are non-compliant with the Product Safety Law
    • they share product risk information, maintain documentation for tracking product origin, and support corrective measures taken by the competent authorities and Economic Operators

    Liability for the Products

    All Economic Operators in supply chain may be held jointly liable until the responsible party is identified.

    Key consequences may include:

    For Non-compliance with the Product Safety Law:

    • a Warning
    • Fines of up to ten million Saudi Riyals
    • Closure of the offending establishment for up to one year

    Non-compliance with the use of the Quality Mark or other marks issued by SASO:

    • Suspension of the right to use the Quality Mark or other marks issued by SASO for up to one year
    • Cancellation of the Quality Mark certificate or other marks issued by SASO
    • Fine up to one million Saudi Riyals

    Regulatory Oversight

    SASO is the primary regulatory body responsible for ensuring compliance with the new Product Safety Law and Standards and Quality Law.

    Both laws empower inspectors to conduct inspections, ensuring that unsafe or non-compliant products are identified and prevented from entering the market.

    Inspectors are specifically authorized to:

    • Enter and inspect the premises of Economic Operators
    • Document violations and summon parties to provide statements
    • Temporarily close locations and seize non-compliant products or documents
    • Review and obtain copies of relevant records and materials
    • Collect product samples for testing

    The current framework suggests that SASO will continue to work closely with the Ministry of Commerce (“MOC”), who oversees consumer protection more generally in the KSA and who will decide on the composition of a dedicated committee for product safety, recalls and market surveillance in line with the issuance instrument of the Product Safety Law and Standards and Quality Law.

    We anticipate further details on this committee and the exact scope and cooperation of these authorities to be clarified in due course.

    Important Dates

    As noted above, businesses operating in the supply chain industry have until 16 November 2024 to ensure compliance with the new Product Safety Law and the Standards and Quality Law.

    The implementing regulations for these laws are expected to be released within 90-days from the date of their issuance (i.e, they are expected to be published by the time these laws come into force in November 2024), providing further guidance on compliance and the relevant technical requirements.

    Legal updates

    Know what’s changing first.

    Legal updates, straight to your inbox.

    Unsubscribe anytime · Privacy